Techincal Information

Model

Taipan

AIM MXT
Taipan

Taipan Y

AIM MXG
Taipan Y

Taipan Y v2

AIM MXP
Taipan Y v2

Overview

Taipan, Taipan Y, and our brand new variant Taipan Y V2, are the aftermarket plug & play ECUs created by Aim, exclusively designed for off-road bikes.
Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your bikes, without sacrificing reliability and smoothness

Technical

  • Two 0-5V analog inputs sampled @ 1,000 Hz each, could be alternatively used as switch to ground
  • Second injector driver for high impedance saturated injectors (12Ω)
  • One low side driver (1A)
  • Two CAN bus, one for calibration purposes, one for expansions (AiM handlebar switch, dataloggers, dash ecc.)
  • Three JST JWPF waterproof auxiliary connector
  • Power consumption: 150 mA
  • Connectors: n.1 JST 04T-JWPF-VSLE-S Connector
  • Connectors: n.1 JST 08R-JWPF-VSLE-D Connector
  • Connectors: n.1 JST 04R-JWPF-VSLE-S Connector
  • Connectors: n.1 33 pin male Connecto
  • Body: PA6 + 30% glass
  • Two 0-5V analog inputs sampled @ 1,000 Hz each, could be alternatively used as switch to ground
  • Second injector driver for high impedance saturated injectors (12Ω)
  • One low side driver (1A)
  • Two CAN bus, one for calibration purposes, one for expansions (AiM handlebar switch, dataloggers, dash ecc.)
  • Three JST JWPF waterproof auxiliary connector
  • Power consumption: 150 mA
  • Connectors: n.1 JST 04T-JWPF-VSLE-S Connector
  • Connectors: n.1 JST 08R-JWPF-VSLE-D Connector
  • Connectors: n.1 JST 04R-JWPF-VSLE-S Connector
  • Connectors: n.1 33 pin male Connecto
  • Body: PA6 + 30% glass
  • Two 0-5V analog inputs sampled @ 1,000 Hz each, could be alternatively used as switch to ground
  • Second injector driver for high impedance saturated injectors (12Ω)
  • One low side driver (1A)
  • One CAN bus, one for calibration purposes
  • Two JST JWPF waterproof auxiliary connector
  • Power consumption: 150 mA
  • Connectors: n.1 JST 04T-JWPF-VSLE-S Connector
  • Connectors: n.1 JST 08R-JWPF-VSLE-D Connector
  • Connectors: n.1 39 pin male Connecto
  • Body: PA6 + 30% glass

Size & Weight

  • Dimensions:89.4x75.4x29.3 mm
  • Weight: 260 g
  • Dimensions: 73.9x95.1x30.4 mm
  • Weight: 230g
  • Dimensions: 64.5x59x29.5 mm
  • Weight: 150g

Waterproof

  • IP67
  • IP67
  • IP67

In the box

  • ECU Taipan Control Unit
  • ECU Taipan Y Control Unit
  • ECU Taipan Y v2 Control Unit

Diagram

taipan technical drawing
taipan Y technical drawing
Taipan Y v2 technical drawing

Downloads